其他分类

230 V AC to 15 V DC 7.5 W. Mains connector for EU.

110 V AC to 15 V DC 7.5 W. Mains connector for USA.

100 - 240 V AC to 6 V DC 10 W.

230 V AC to 15 V DC 7.5 W. Mains connector for UK.

6-pin LEMO FFA.2S.306 male plug as supplied with GRAS 41AM/CN

7-pin LEMO FGG.1B.307 male plug for preamplifier extension cables.

7-pin LEMO 1B series female connector for panel mounting.

7-pin LEMO 1B series female connector for cable mounting.

A shelf for mounting instrument, e.g. GRAS Power Modules, and can itself be mounted in a standard 19” instrument rack via its flanges.

Bracket for mounting two GRAS Power Modules (GRAS 12AA/12AK) side-by-side.

Provides a convenient platform for calibrating IEC 60318-1 Ear Simulator e.g. GRAS RA0039.

For Array module Type PR0001/PR0001-1 and PR0002.

Used to extend Array Module Type PR0001/ PR0001-1 in the horizontal direction.

The 50 mm spacer is used to extend a microphone array with Array Module Type PR0001/ PR0001-1 in the vertical direction.

The PA0018 is a cable drum for approximately 200 m microphone cable.

A mounting rail with central cable connection for up to six GRAS array microphones, e.g. GRAS 40PH or 40PL.

A mounting rail which allows array microphones to be spaced at intervals of 25 mm, 50 mm, 75 mm, 100 mm, etc.

The GRAS PR0003 AutoArray is a rugged, six-microphone array purpose-built for accurate and repeatable in-cabin acoustic measurements. It features a "Cross" configuration based on widely adopted test setups like those used by Harman. This array enables high-resolution spatial analysis of vehicle interiors, giving automotive OEMs and audio engineers the tools to quantify and enhance cabin soundscapes. Microphones are sold separately

The GRAS PR0004 AutoArray is a rugged, six-microphone array purpose-built for accurate and repeatable in-cabin acoustic measurements. It features an "AES" configuration, aligned with the AES TC-AA (Audio Engineering Society Technical Committee on Automotive Audio) guidelines. This array enables high-resolution spatial analysis of vehicle interiors, giving automotive OEMs and audio engineers the tools to quantify and enhance cabin soundscapes. Microphones are sold separately

Straight adapter, length 7.5 mm, for placing between a 1/4" microphone and a 1/4" preamplifier. This item is an extender (not adapting anything).

For utilising the signal and signal-ground pins only of the 7-pin LEMO input of a preamplifier power supply.  

Used when dismantling the microphone assembly of Outdoor Microphone Systems.

A set of 6 spacers (50 mm) GR0707 for Array Modules PR0001 and PR0001-1.

The GRAS RA0399