前置放大器配件
Adapter for GRAS 1/2" mic. and GRAS 26AB preamplifier.
GRAS AF0008 Adapter for 1/4" preamplifier and 1/2" microphone
The GRAS AF0008 is an adapter for using a 1/2" microphone cartridge with a GRAS 26AB 1/4" preamplifier.
GRAS AG0001 Adapter for 7-pin LEMO to B&K
The AG0001 is an adapter for a 7-pin LEMO connector and a traditional 7-Pin B&K microphone input connector.
GRAS AG0002 CCP Input Adapter
An adapter for using a CCP preamplifier/microphone set with a GRAS 12AA, 12AG or 12AK Power Module. One end plugs straight into the Power Module’s input LEMO connector and the other end has a BNC socket for making a connection with a CCP preamplifier/microphone set.
With this adapter you can connect a CCP preamplifier/microphone set to equipment with a phantom powered XLR connector.
GRAS AG0003 Adapter for CCP preamplifier to XLR
The GRAS AG0003 is an adapter for an XLR connector and a CCP compatible preamplifier with a BNC Connector at the end of the cable.
Length: 9 mm
Inner threading for preamp.: 5.70-60 UNS-2
Outer threading for mic.: 11.70-60 UNS-2
Material: stainless steel
GRAS GR0010 Adapter for 1/4" preamplifier and 1/2" microphone
The GRAS GR0010 is an adapter for adapting a GRAS 1/2" pressure microphone to a GRAS 1/4" preamplifier.
Length: 47.50 mm (excl. connector)
Diameter: 12.70 mm
Material: stainless steel
GRAS RA0062 20 pF Preamplifier-input Adapter for 1/2" preamplifiers
The RA0062 is a 20 pF input adapter for 1/2" preamplifiers. One end screws on to a 1/2" preamplifier and the other end has a BNC input connector. This enables connecting a signal generator to the input of the preamplifier. Short circuiting the BNC input results only in loading the preamplifier by 20 pF.
Length: 47.50 mm (excl. connector)
Diameter: 12.70 mm
Material: stainless steel
GRAS RA0062-S1 50 pF Preamplifier-input Adapter for 1/2" preamplifiers
The RA0062-S1 is a 50 pF input adapter for 1/2" preamplifiers. One end screws on to a 1/2" preamplifier and the other end has a BNC input connector. This enables connecting a signal generator to the input of the preamplifier. Short circuiting the BNC input results only in loading the preamplifier by 50 pF.
Length: (excl. connector): 37.5 mm
Diameter: 6.35 mm
Material: stainless steel
GRAS RA0080 6pF Preamplifier-input adapter for 1/4" microphones
The RA0080 is a 6pF input adapter for 1/4" preamplifiers. One end screws on to a 1/4" preamplifier and the other end has a Microdot input connector. This enables connecting a signal generator to the input of the preamplifier. Short circuiting the Microdot input results only in loading the preamplifier by 6 pF.
材质：不锈钢
尺寸：用于 1/4″ 和阵列模块
特殊功能：以 45 度为步进可调
GRAS RA0094 用于阵列模块的三点卡入式支架，不锈钢
一款可调节的高品质不锈钢支架，用于将 PR0001 或 PR0002 阵列模块安装在三脚架上。 角度调节：180°，步进 45°
GRAS RA0125 Adapter for microdot input to a 1/2” preamplifier
The RA0125 is to be mounted instead of a microphone on a standard 1/2" preamplifier such as the Type 26AK. Thereby you get a Microdot (UNF 10-32) input to the preamplifier. Useful when a high input impedance is required for transducers such as hydrophones and accelerometers.
材质：黑色 POM
GRAS RA0185 用于 PR0002 阵列模块的阵列传声器支架
GRAS RA0185 是一款支架，用于将一个阵列传声器 (直径 7 mm) 安装在 GRAS PR0002 阵列模块上。
材质：黑色 POM
GRAS RA0245 用于 PR0002 阵列模块的 1/4″ 传声器套件支架
GRAS RA0245 是一款支架，用于将一个带 Microdot 接头的标准 1/4″ 传声器套件安装在 GRAS PR0002 阵列模块上。
