CCP 前置放大器

CCP前置放大器通过标准同轴电缆和插头(例如BNC)连接到CCP电源(例如GRAS Type 12AL),或连接到具有CCP输入的分析仪。在CCP前置放大器中,电源在传输信号的同一根导线上维持恒定电流,因此仅需标准同轴电缆和连接器。

GRAS 单独提供测量传声器传声器前置放大器,是声学行业首家将这两项产品捆绑销售的公司!您可以从 GRAS 提供的各种测量传声器一体装置中进行选择。

GRAS 26CA 1/2'' CCP Standard Preamplifier with BNC Connector

Freq range: 2.5 Hz - 200 kHz
Noise: 1.8 µV Gain: -0.30 dB
Special feature: General purpose

GRAS 26CA 1/2'' CCP Standard Preamplifier with BNC Connector

The GRAS 1/2" Preamplifier GRAS 26CA is a general purpose preamplifier optimized for use with prepolarized condenser microphones. It is a small,robust unit and uses a GRAS CCP power supply (ICP ®), e.g. GRAS 12AL. It has a very low inherent noise level, and a large dynamic range and a frequency response from below 2 Hz to above 200 kHz.

GRAS 26CA-HT 1/2'' CCP High Temperature Preamplifier with BNC Connector

Freq range: 2.5 Hz - 200 kHz
Noise: 1.8 µV Gain: -0.30 dB
Special feature: High Temperature

GRAS 26CA-HT 1/2'' CCP High Temperature Preamplifier with BNC Connector

The GRAS 26CA-HT 1/2" CCP High Temperature Preamp (BNC) is a 1/2" CCP preamplifier for use with prepolarized microphones. It is optimized for high-temperature applications up to 120 °C (248 °F).  It has a low inherent noise level, a large dynamic range and a frequency response from 2 Hz to 200 kHz.

GRAS 26CB-HT 1/4″ CCP Standard Preamplifier with Microdot Connector

Freq range: 2.5 Hz - 200 kHz
Noise: 1.8 µV Gain: -0.35 dB
Special feature: High temperatures

GRAS 26CB-HT 1/4″ CCP Standard Preamplifier with Microdot Connector

The GRAS 1/4″ preamplifier is a general-purpose preamplifier optimized for use with prepolarized condenser microphones. It is a small, robust unit and uses a GRAS CCP power supply, e.g., GRAS 12AL. It has a very low inherent noise level, a large dynamic range, and a frequency response from below 2 Hz to above 200 kHz.

GRAS 26CI 1/2'' CCP Preamplifier with BNC Connector, Low Frequency

Freq range: 1 Hz - 200 kHz
Noise: 1.8 µV Gain: -0.35 dB
Special feature: Low frequency

GRAS 26CI 1/2'' CCP Preamplifier with BNC Connector, Low Frequency

The GRAS 1/2" Preamplifier GRAS 26CI is a preamplifier optimized for low frequency use together with prepolarized condenser microphones. It is a small, robust unit and uses a GRAS CCP power supply (ICP ®), e.g. GRAS 12AL. It has a very low inherent noise level, and a large dynamic range and a frequency response from below 1 Hz to above 200 kHz.

GRAS 26CT 1/4" CCP Standard Preamplifier with SMB Connector, Very Short

Freq range: 2.5 Hz - 200 kHz
Noise: 1.8 µV Gain: -0.45 dB
Special feature: For confined spaces

GRAS 26CT 1/4" CCP Standard Preamplifier with SMB Connector, Very Short

The GRAS 26CT 1/4" Preamplifier is a very small preamplifier optimized for use with prepolarized condenser microphones. It is a robust unit and uses a CCP power supply. It has a very low inherent noise level, a large dynamic range and a frequency response from below 2 Hz to above 200 kHz.

GRAS 26CB 1/4" CCP Standard Preamplifier for Microphone with Microdot Connector

Freq range: 2.5 Hz - 200 kHz
Noise: 1.8 µV Gain: -0.35 dB
Special feature: General purpose

GRAS 26CB 1/4" CCP Standard Preamplifier for Microphone with Microdot Connector

The GRAS 26CB 1/4" CCP Standard Preamplifier with Microdot Connector is a general-purpose preamplifier optimized for use with prepolarized condenser microphones. It is a small, robust unit and uses a GRAS CCP power supply, e.g., GRAS 12AL. It has a very low inherent noise level, a large dynamic range, and a frequency response from below 2 Hz to above 200 kHz.

GRAS 26CC 1/4" CCP Standard Preamplifier with SMB Connector

Freq range: 2.5 Hz - 200 kHz
Noise: 1.8 µV Gain: -0.35 dB
Special feature: General purpose

GRAS 26CC 1/4" CCP Standard Preamplifier with SMB Connector

The GRAS 26CC 1/4" Preamplifier is a general purpose preamplifier optimized for use with prepolarized condenser microphones. It is a small, robust unit and uses a GRAS CCP power supply, e.g. GRAS 12AL. It has a very low inherent noise level, a large dynamic range and a frequency response from below 2 Hz to above 200 kHz.

GRAS 26CF 1/2'' CCP Preamplifier with BNC Connector, Gain and Filters

Freq range: 2.5 Hz - 200 kHz
Noise: 1.8 µV Gain: -0.25 / +20 dB
Special feature: 0/20 dB gain, A-weighting and HP filters

GRAS 26CF 1/2'' CCP Preamplifier with BNC Connector, Gain and Filters

The GRAS 1/2-inch Preamplifier GRAS 26CF is a general purpose preamplifier optimized for use with prepolarized condenser microphones. It is a small, robust unit and uses a GRAS CCP power supply, e.g. GRAS 12AL. It has low inherent noise level, a large dynamic range and a frequency response from 2.5 Hz to 100 kHz.

GRAS 26CG 1/4" CCP Preamplifier with Microdot Connector, Low Frequency

Freq range: 1 Hz - 200 kHz
Noise: 1.8 µV Gain: -0.35 dB
Special feature: For low-frequency applications

GRAS 26CG 1/4" CCP Preamplifier with Microdot Connector, Low Frequency

The GRAS 26CG ¼″ CCP Preamplifier is a small robust unit optimised for acoustic measurements using condenser microphones. It has a very low inherent noise level, a wide dynamic range, and a wide frequency response from below 1 Hz to above 200 kHz.

GRAS 26CK 1/2” CCP Standard Preamplifier with Microdot Connector, Very Short

Freq range: 2.5 Hz - 200 kHz
Noise: 1.8 µV Gain: -0.45 dB
Special feature: For confined spaces

GRAS 26CK 1/2” CCP Standard Preamplifier with Microdot Connector, Very Short

The GRAS 26CK ½” Preamplifier, Very Short is a very small preamplifier optimized for use with prepolarized condenser microphones. It is a robust unit that uses a constant current power (CCP) supply. The 26CK has a very low inherent noise level, a large dynamic range, and a frequency response from below 2 Hz to above 200 kHz.

GRAS 26CS 1/4" CCP Standard Preamplifier with Microdot Connector, Very Short

Freq range: 2.5 Hz - 200 kHz
Noise: 1.8 µV Gain: -0.45 dB
Special feature: For confined spaces

GRAS 26CS 1/4" CCP Standard Preamplifier with Microdot Connector, Very Short

The GRAS 26CS 1/4" Preamplifier is a very small preamplifier optimized for use with prepolarized condenser microphones. It is a robust unit and uses a CCP power supply. It has a very low inherent noise level, a large dynamic range and a frequency response from below 2 Hz to above 200 kHz.

No more products